Digital Key Pad Wall Safe with Shelves

Free ground shipping in the contiguous 48 United States for orders over $100.

Our wall safe is the perfect hidden wall safe. This safe is easily veiled behind mirrors, pictures, or furniture. The inset door and knob allow it to sit flush against the wall, providing complete concealment. It easily retrofits easily between standard 16″ studs and its spacious interior provides enough room for your valuables. Overall size is: 3.7 x 13.8 x 20.3 inches

• Electronic digital lock
• Easily retrofits in any standard wall
• External dimensions: 20.67-Inch 13.78-Inch by 3.74-Inch
• Internal dimensions: 20.28-Inch by 13.39-Inch by 3.35-Inch
• Requires 4 AA batteries, not included
• Removable shelves

How do I use the safe? To open the safe, enter your combination code and confirm by pressing the “A” button. You will hear a beep and the green light will light up. Within 5 seconds, open the door using the knob. If an incorrect combination is used 3 times consecutively, you must wait for 20 seconds before reattempting to open the safe. If again, after the 20 second wait, an incorrect combination is entered 3 times consecutively, you must wait approximately 5 minutes before reattempting access.

Programming your personal code is quick and easy. A. Press the red button “X” (see diagram 1) on the back of the door near the hinge, release it and you will hear two beeps. B. Now enter a code (3 to 8 digits) that you wish to use as a combination, and confirm by pressing the “B” button within 15 seconds. If you wait too long before pressing the “B” button you will need to start over. C. Write down your new combination immediately and test your new combination to ensure that it has been programmed.

What happens if the batteries start to go low? If the batteries are low, the red light (on the left) will warn you immediately upon an access attempt. To test the batteries, simply input your combination to open the door. If the batteries are low, the red light will light up. If there is no red light when accessing the safe then the batteries are in good condition.

What happens if you forget the combination or the battery dies? Your safe comes with a manual override system. If you forget or misplace your combination, remove the small central sticker on the front panel with the key picture on it (see “Z” in diagram 2). Insert the key into the keyhole and turn it counter-clockwise, then turn the knob clockwise (towards the right). This will manually open your safe.